Rita Robert’s brilliant essay, The Construction of the Mycenaean Chariot:

The Construction of a Mycenaean Chariot

Even though we have examples shown on frescoes and pottery vessels depicting chariots, it is difficult to say for sure how a Mycenaean chariot was constructed.

These examples however, only give us mostly a side view, which presents a problem. What we really need to find, is an example which shows all angles, for us to get a better understanding of the Mycenaean chariots construction.

It is hard to visualize these chariots as they actually appeared in Mycenaean times, 1400- 1200 BC. But they were certainly built for battle worthiness when needed.

It is to be noted that the Mycenaean military, as that of other ancient civilizations, such as those of Egypt in the Bronze Age, the Hittite Empire, the Iron Age of Athens and Sparta, and later still, of the Roman Empire, most certainly would have gone to great lengths in manufacturing all parts of the chariots to be battle worthy, strong and resistant to wear, and of the highest standards within the limits of technology available to them in Mycenaean times.

The chariot, most likely invented in the Near East, became one of the most innovative items of weaponry in Bronze Age warfare. It seems that the Achaeans adopted the chariot for use in warfare in the late 16th century BC, as attested to on some gravestones as well as seals and rings.

It is thought that the chariot did not come to the mainland via Crete, but the other way around, and it was not until the mid 15th century BC that  the chariot appears on the island of Crete, as attested to by seal engravings and the Linear B Tablets.

The Achaean chariots can be divided into five main designs which can be identified as, “box chariot”,  “quadrant chariot”, “rail chariot” and “four wheeled chariot.” None completely survived, but some metallic parts and horse bits have been found in some graves and settlements, also chariot bodies, wheels and horses are inventoried in several Linear B tablets.

The “rail chariot” was a light vehicle which featured an open cab and was more likely used as a means of transport than as a mobile fighting vehicle.  The “four wheeled chariot,” used since the 16th century BC, was utilized throughout the late Helladic time. Both the “rail chariot”, and the “ four- wheeled chariot “ continued to be used after the end of the Bronze Age.

Based on some hunting scenes and armed charioteer representations on pottery vessels and Linear B tablets, there is no question that the chariots were used in warfare as a platform for throwing javelins (or thrusting long spears), as a means of conveyance  to and from battle and,  on fewer occasions, as a platform for a bow-armed warrior. These warriors could have fought as cavalry or a force of mounted infantry, particularly suited to responding to the kind of raids that seem to have been occurring in the later period.

Some thoughts on the construction of the Mycenaean chariot:

As we cannot be absolutely sure how the Mycenaean chariot was constructed, we have to use pictorial examples, leaving us little choice, other than that of resorting to a close examination of the pottery vessels and frescoes depicting them, and whatever other sources are available. So I have chosen the beautiful “Tiryns Fresco” 1200 BC as an example of the construction and design of the Mycenaean chariot, although some points differ in other depictions on various other frescoes.

The Mycenaean chariots were made to be drawn by two horses attached to a central pole. If two additional horses were added, they were attached on either side of the main team by a single bar fastened to the front of the chariot. The chariot itself consisted of a basket with a rail each side and a foot board” for the driver to stand on. The body of the chariot rested directly on the axle connecting the two wheels. The harness of each horse consisted of a bridle and reins, usually made of leather, and ornamented with studs of ivory or horn. The reins were passed through collar bands or yoke, and were long enough to be tied around the waist of the charioteer, allowing him to defend himself when necessary.

The wheels and basket of the chariot were usually of wood, strengthened in places with bronze, the basket sometimes covered with wicker wood. The wheels had four to eight spokes.

Most other nations of this time the, “Bronze Age,” had chariots of similar design to the Greeks, the chief differences being the mountings.

Source: Chariots of Greece

chariots in Greece

The components needed to build a chariot:

Chariot  =  iqiya
Axle = akosone
Wheels = amota
Rims of Wheels = temidweta
Willow wood = erika
Elm wood = pterewa
Bronze = kako
Spokes
Leather = wirino
Reins = aniya
Pole
Rivets
Studs
Spokes
Ivory = erepato
Horn = kera
Foot board = peqato
Gold = kuruso
Silver= akuro

Tiryns fresco
The lovely Tiryns Fresco

Pylos fresco
Chariot Fresco from Pylos

Mycenaean rail chariot
Bronze Age Chariot

Bronze Age war chariot
Bronze Age War Chariot

vase with Mycenaean chariot
Amphora depicting Bronze Age chariot

box chariots
Achaean Small Box Chariots with an example of the horse harness

The cabs of these chariots were framed in steam bent wood and probably covered with ox-hide  or wicker work, the floor consisting more likely of interwoven raw-hide thongs. The early small box-chariots were crewed either by one single man or two men, a charioteer and a warrior. The small box-chariot differ in terms of design from the Near Eastern type. The four spoke wheels seem to be standard throughout this period.


Rita Roberts, Haghia Triada, Crete